TODO 3/TODO #3.iso/win311/setup.inf

INI File | 1993-10-31 | 57.2 KB | 1,476 lines

;; Windows for Workgroups 3.11
;; SETUP.INF
;; Copyright (c) Microsoft Corporation, 1991-1993

[setup]
    help = instalar.hlp

;   Place any programs here that should be run at the end of setup.
;   These apps will be run in order of their appearance here.
[run]

[dialog]
    caption   = "Instalar Windows"
    exit      = "Salir de Instalar"
    title     = "Instalando Windows para Trabajo en Grupo 3.11"
    options   = "Ademßs de instalar Windows, puede:"
    printwait = "Espere, por favor, mientras Instalar configura su(s) impresora(s)..."
;copywait="íBienvenido a Microsoft Windows para Trabajo en Grupo 3.11!\n\n   - Si es la primera vez que utiliza Windows, consulte\n     'Recorrido por Microsoft Windows' en el manual Introducci≤n."
;copywait5="Aseg·rese de registrar su copia de Microsoft Windows para\nTrabajo en Grupo 3.11. Una vez que haya registrado su copia, Microsoft:\n\n   - Le notificarß de las nuevas versiones y productos.\n\n   - Le enviarß un boletφn gratuito de Windows."

[data]
; Disk space required
; <type of setup>= <Full install space>, <Min install space>

    upd2x386full = 19000000,14000000 ; 19.0 Mb, 14.0 Mb     2.x -> WFW 3.11
    upd30386full = 14500000,10500000 ; 14.5 Mb, 10.5 Mb     3.0 -> WFW 3.11
    upd31386full = 10500000, 7500000 ; 10.5 Mb,  7.5 Mb     3.1 -> WFW 3.11
    updWW386full =  6000000, 3500000 ;  6.0 Mb,  3.5 Mb     WFW 3.1  -> WFW 3.11
    updW1386full =  3000000, 2000000 ;  3.0 Mb,  2.0 Mb     WFW 3.11 -> WFW 3.11
    new386full   = 19000000,14000000 ; 19.0 Mb, 14.0 Mb

    netadmin     = 29000000          ; 29.0 Mb
    netadminupd  = 29000000          ; 29.0 Mb
    upd2x386net  = 1300000           ;  1.3 Mb
    upd30386net  = 1300000           ;  1.3 Mb
    upd31386net  = 1300000           ;  1.3 Mb
    new386net    = 1300000,1300000   ;  1.3 Mb,  1.3 Mb

; Defaults used in setting up and names of a few files
    startup   = WIN.COM
    defdir    = C:\WINDOWS
    defdevdir = C:\NET
    shortname = Windows
    welcome   = "Microsoft Windows para Trabajo en Grupo 3.11"
    deflang   = esp
    defxlat   = 850
    defkeydll = spadll
    register  = "regedit /s /u setup.reg"
    tutor     = "wintutor.exe "
    winsetup  = "winsetup.exe"
    NetSetup  = FALSE
    MouseDrv  = TRUE
    partial   = FALSE
    Version   = "3.11.050"
    dosmemK  =  410

    ; MS-DOS Driver Versions
    ; These are the version numbers of the drivers that we are shipping
    ; with Microsoft Windows.
    himem.sys.hi     = 0x0310
    himem.sys.lo     = 0x0300
    smartdrv.exe     = 0x0500
    ramdrive.sys     = 0x18F5
    emm386.exe       = 0x0430

; This is data needed by the MS-DOS half of setup so that it can copy the
; proper kernel and start Windows for the GUI portion of setup.
;
; ** MS-DOS documentation says that first byte of command line for 4a call
; ** should be space. ==> in execcmd RHS leave first space as it is now
[winexec]
    execstd   = "dosx.exe "
    execcmd   = " krnl386.exe /b /q:"
    exechimem = "xmsmmgr.exe"
    himemcmd  = ""
    Krnl386   = 1:krnl386.exe
    dosx      = 2:dosx.exe

; Names of the disks Setup can prompt for.
[disks]
    1 =. ,"Disquete #1 de Windows para Trabajo en Grupo 3.11",disk1
    2 =. ,"Disquete #2 de Windows para Trabajo en Grupo 3.11",disk2
    3 =. ,"Disquete #3 de Windows para Trabajo en Grupo 3.11",disk3
    4 =. ,"Disquete #4 de Windows para Trabajo en Grupo 3.11",disk4
    5 =. ,"Disquete #5 de Windows para Trabajo en Grupo 3.11",disk5
    6 =. ,"Disquete #6 de Windows para Trabajo en Grupo 3.11",disk6
    7 =. ,"Disquete #7 de Windows para Trabajo en Grupo 3.11",disk7
    8 =. ,"Disquete #8 de Windows para Trabajo en Grupo 3.11",disk8
    9 =. ,"Disquete #9 de Windows para Trabajo en Grupo 3.11",disk9

[windows]
    1:instalar.hlp
    1:instalar.txt
    2:win.src,    Net
    2:system.src, Net
    1:winsetup.exe
    1:winhelp.exe
    1:control.hlp

[windows.system]
    1:gdi.exe
    1:user.exe
    1:win.cnf
    2:lzexpand.dll
    2:ver.dll
    2:shell.dll
    1:wfwsetup.dll
    2:commdlg.dll
    1:commctrl.dll
    1:ncdw.dll
    2:sconfig.dll

[windows.system.386]
    2:cpwin386.cpl

[386max]
    2:386max.vxd
    2:windows.lod

[bluemax]
    2:bluemax.vxd
    2:windows.lod

[shell]
    progman.exe,  "Administrador de programas"

; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
: !!! The description strings should not be changed.
; !!! Changing description strings can result in old drivers not being
; !!! upgraded since Setup uses the description string to determine what
; !!! driver is installed and whether a new, upgraded driver is provided
; !!! with this version of Windows.
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;

[display]
;profile = driver,         Description of driver,                           resolution,286gr,logo code,       VDD,            386grabber,   ega.sys,   logo data,    optional work section
;
8514     = 2:8514.drv,     "8514/a",                                          "100,120,120", , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514
8514s    = 2:8514.drv,     "8514/a-Fuente peque±a",                           "100,96,96",   , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514s
vga      = 2:vga.drv,      "VGA",                                             "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
vga30    = 2:vga.drv,      "VGA-Versi≤n 3.0",                                 "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
svga     = 2:supervga.drv, "Super VGA-800x600, 16 colores",                   "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
8vga480  = 2:svga256.drv,  "Super VGA-640x480, 256 colores",                  "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga640
8vga600l = 2:svga256.drv,  "Super VGA-800x600, 256 colores, Fuente grande",   "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800l
8vga600s = 2:svga256.drv,  "Super VGA-800x600, 256 colores, Fuente peque±a",  "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800s
8vga768l = 2:svga256.drv,  "Super VGA-1024x768, 256 colores, Fuente grande",  "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768l
8vga768s = 2:svga256.drv,  "Super VGA-1024x768, 256 colores, Fuente peque±a", "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768s
v7vga    = 2:v7vga.drv,    "Video7-512K, 640x480 256 colores",                "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7b
v7c      = 2:v7vga.drv,    "Video7-512K, 720x512 256 colores",                "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7c
v7d      = 2:v7vga.drv,    "Video7-1Mb,  800x600 256 colores",                "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7d
v7e      = 2:v7vga.drv,    "Video7-1Mb, 1024x768 256 colores, Fuente grande", "100,120,120", , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7e
v7f      = 2:v7vga.drv,    "Video7-1Mb, 1024x768 256 colores, Fuente peque±a","100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7f
xga16    = 2:vga.drv,      "XGA-640x480, 16 colores",                         "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
xgasm    = 2:xga.drv,      "XGA-Fuente peque±a",                              "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgasm
xgalg    = 2:xga.drv,      "XGA-Fuente grande",                               "100,120,120", , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalg
xgalo    = 2:xga.drv,      "XGA-640x480, 256 colores",                        "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalo

[display.old]
; This section contains the names of all the videos that
; setup can detect. If the entry is not in the [display]
; section above, setup presents a warning to the user.
8514     = "8514/a"
cga      = "CGA"
egahibw  = "EGA blanco y negro (s≤lo 286)"
egahires = "EGA"
egamono  = "EGA con pantalla monocromßtica (s≤lo 286)"
hercules = "Hercules con pantalla monocromßtica"
hpmulti  = "HP con pantalla CGA"
mcga     = "IBM MCGA (s≤lo 286)"
olibw    = "Olivetti/AT&T con pantalla monocromßtica o pantalla PVC"
plasma   = "Compaq Portable Plasma"
tiga1    = "TIGA"
v7vga    = "Video 7"
vga      = "VGA"
vgamono  = "VGA con pantalla monocromßtica"
xga16    = "XGA"


;
; Optional sections listed in field 9 of the display secton are intrpreted as follows:
;
; File, Destination, .ini file, Section, LHS, RHS
;
; Where:    x:File      = Optional; file to be copied, may be left null.
;           Destination = 0: for windows root or 0:system for system subdir
;                          where file is to be copied.
;           .ini file   = Optional; .ini file to be modified or created.
;                          Must be included if following parameters specified.
;           Section     = Section of .ini file to be modified.
;           OldLine     = Optional; old line to be removed from the .ini file.
;                          Only one occurence of the specified string is removed.
;           NewLine     = New text line to be written to the .ini file.
;
;[v7vga]
;x:v7vga.vxd, 0:system, system.ini, 386enh, "v7device=", "display=v7vdd.386"

[vgamono]
,,system.ini,386enh,"vgamono=","vgamono=TRUE"

[8514]
,,system.ini,8514.DRV,"dpi=","dpi=120"

[8514s]
,,system.ini,8514.DRV,"dpi=","dpi=96"

[v7b]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=640x480"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7c]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=720x512"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7d]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=800x600"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7e]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=large"

[v7f]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[xgasm]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[xgalg]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=2"

[xgalo]
,,system.ini,XGA_Display,"XGA_Resolution=","XGA_Resolution=1"
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[svga640]
,,system.ini,svga256.drv,"resolution=","resolution=1"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi="
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800s]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800l]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768s]
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768l]
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"


; copy these fonts depending on the 386 grabber being used
[VGA.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[VGA30.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[V7VGA.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[vgadib.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON


[keyboard.drivers]
kbd   = 2:keyboard.drv
kbdhp = 2:kbdhp.drv

[keyboard.types]
t3s0alat  = "Todos los teclados tipo AT (84-86 teclas)" ,nodll
t1s2at&t  = "Teclado AT&T '301'"                        ,nodll
t1s4at&t  = "Teclado AT&T '302'"                        ,nodll
t4s0enha  = "Teclados US y No US de 101 ≤ 102 teclas"   ,nodll
t3s0hp1   = "Teclado Vectra de Hewlett-Packard (DIN)"   ,nodll
t4s40oliv = "Teclado Olivetti 101/102 A"                ,nodll
t1s0oliv  = "Teclado Olivetti de 83 teclas"             ,nodll
t3s10oliv = "Teclado Olivetti de 86 teclas"             ,nodll
t2s1oliv  = "Teclado Olivetti M24 de 102 teclas"        ,usadll
t1s42oliv = "Teclado PC-XT de 83 teclas"                ,nodll
t1s0pcxt  = "Teclado tipo PC/XT de 84 teclas"           ,nodll

[keyboard.tables]
gerdll = 2:kbdgr.dll , "Alemßn"
beldll = 2:kbdbe.dll , "Belga"
bradll = 2:kbdbr.dll , "Brasilero"
cafdll = 1:kbdfc.dll , "Canadiense Multilingⁿe"
dandll = 2:kbdda.dll , "DanΘs"
nodll  =             , "EE.UU."
usadll = 2:kbdus.dll , "EE.UU."
usddll = 2:kbddv.dll , "EE.UU.-Dvorak"
usxdll = 2:kbdusx.dll, "EE.UU.-Internacional"
spadll = 2:kbdsp.dll , "Espa±ol"
findll = 2:kbdfi.dll , "FinlandΘs"
fredll = 2:kbdfr.dll , "FrancΘs"
candll = 2:kbdca.dll , "FrancΘs canadiense"
dutdll = 2:kbdne.dll , "HolandΘs"
bridll = 2:kbduk.dll , "InglΘs britßnico"
icedll = 2:kbdic.dll , "IslandΘs"
itadll = 2:kbdit.dll , "Italiano"
latdll = 2:kbdla.dll , "Latino americano"
nordll = 2:kbdno.dll , "Noruego"
pordll = 2:kbdpo.dll , "PortuguΘs"
swedll = 2:kbdsw.dll , "Sueco"
swgdll = 2:kbdsg.dll , "Suizo-alemßn"
swfdll = 2:kbdsf.dll , "Suizo-francΘs"

[codepages]
;       Xlat Table     OEM Font      WOA Font     Description
863 = 2:xlat863.bin, 2:vga863.fon, 2:dosapp.fon, "FrancΘs-canadiense (863)"
861 = 2:xlat861.bin, 2:vga861.fon, 2:app850.fon, "IslandΘs (861)"
865 = 2:xlat865.bin, 2:vga865.fon, 2:app850.fon, "Noruego y DanΘs (865)"
850 = 2:xlat850.bin, 2:vga850.fon, 2:app850.fon, "Internacional (850)"
860 = 2:xlat860.bin, 2:vga860.fon, 2:dosapp.fon, "PortuguΘs (860)"
437 =              ,             , 2:dosapp.fon, "Estßndar (437)"

[pointing.device]
;
; Note: the VMD field may contain multiple VXD's in the form "x:*vmd,2:1vmd.386".
;       Please note, however, that if multiple VXD's are specified in the VMD field
;       they must be surrounded by double quotes (").
;
;profile =  mouse driver,   Mouse description,                 VMD,     Optional work section
;
lmouse   = 2:lmouse.drv,  "Logitech",                                  2:lvmd.386, lmouse
ps2mouse = 2:mouse.drv,   "Microsoft o IBM PS/2",                      x:*vmd
genius1  = 2:mscmouse.drv,"Mouse serial Genius en COM1",               2:mscvmd.386
genius2  = 2:msc3bc2.drv, "Mouse serial Genius en COM2",               2:mscvmd.386
msmouse2 = 2:mscmouse.drv,"Mouse Systems serial o bus",                2:mscvmd.386
msmouse1 = 2:msc3bc2.drv, "Mouse Systems serial en COM2",              2:mscvmd.386
nomouse  = 2:nomouse.drv, "No hay Mouse u otro dispositivo se±alador", x:*vmd

[lmouse]
2:lmouse.com,0:,,,,

[dos.mouse.drivers]

[dos.drivers]
MSCDEX.EXE  = 6:MSCDEX.EXE,   "Extensiones CD ROM"

[sysfonts]
 2:vgasys.fon,"Fuente System para VGA (res. de 640x480)", "100,96,96"
2:8514sys.fon,"Fuente System para 8514/a (res. de 1024x768)", "100,120,120"

[fixedfonts]
 2:vgafix.fon,"Fuente fija System VGA (res. 640x480)", "100,96,96"
2:8514fix.fon,"Fuente fija System 8514/a (res. 1024x768)",  "100,120,120"

[oemfonts]
 2:vgaoem.fon,"Fuente Terminal VGA (USA/Europa 640x480)", "100,96,96",1
2:8514oem.fon,"Fuente Terminal 8514/a (USA/Europa 1024x768)", "100,120,120",1

;   The win.copy section is a list of files or sections to copy to the WINDOWS
;   directoy.
;
;   FORMAT      from,to
;
;   IE
;       1:foo.txt,  0:        copy foo.txt from disk 1 to the windows directory
;       #386,       0:system  copy all files in the 386 SECTION to the
;
;
[win.copy.net.win386]
; copy this section for network setup on 386 machines
   #net,       0:

[win.copy.win386]
; copy this section for full setup on 386 machines
   #net,       0:
   #win.shell, 0:
   #pwin386,   0:system
   #mapi,      0:system
   #win.other, 0:system

[net]
   7:CONTROL.SRC,    "Archivos del usuario para Windows"
   7:WINVER
   6:WININIT.EXE,    "Utilidad de Inicializaci≤n-Instalar sistema"

[win.devices]
; These devices will be copied on all machines
   6:HIMEM.SYS,      "Administrador de memoria XMS"
   6:SMARTDRV.EXE,   "Programa de cachΘ de disco"
   7:RAMDRIVE.SYS,   "Programa controlador de RAM"
   7:IFSHLP.SYS,     "Administrador de archivos del sistema"

[win.devices.win386]
; These devices will be copied on 386 machines only
   6:HIMEM.SYS,      "Administrador de memoria XMS"
   4:EMM386.EXE,     "Administrador de memoria expandida LIM"
   6:SMARTDRV.EXE,   "Programa de cachΘ de disco"
   7:RAMDRIVE.SYS,   "Programa controlador de RAM"
   7:IFSHLP.SYS,     "Administrador de archivos del sistema"

[win.other]
   7:WIN87EM.DLL,    "Componente del sistema Windows"
   6:SYSEDIT.EXE
   6:NDDEAPI.DLL
   5:OLECLI.DLL
   6:OLESVR.DLL
   6:WSWAP.EXE
   5:MIDIMAP.DRV
   7:MIDIMAP.CFG,,noclobber
   7:SND.CPL,,novermsg
   5:MMSYSTEM.DLL
   7:MMTASK.TSK
   5:TIMER.DRV
   6:MCISEQ.DRV
   6:MCIWAVE.DRV
   6:TOOLHELP.DLL
   4:MAIN.CPL
   6:DRIVERS.CPL
   7:SETUP.REG
   4:CONTROL.INF
   6:APPS.INF
   6:DDEML.DLL
   4:NETWORK.INF
   6:WINNET.INF
   7:LM21DRV.UPD
   4:UNIDRV.DLL
   5:UNIDRV.HLP

[mapi]
   4:AB.DLL,    "Componente del sistema Windows Mail"
   6:DEMILAYR.DLL
   3:FRAMEWRK.DLL
   6:MAILMGR.DLL
   5:MAILSPL.EXE
   5:MAPI.DLL
   5:CMC.DLL
   3:MSSFS.DLL
   6:PABNSP.DLL
   7:SENDFILE.DLL
   3:STORE.DLL
   4:VFORMS.DLL

[win.shell]
   4:PROGMAN.EXE,    "Administrador de programas"
   7:TASKMAN.EXE,    "Administrador de tareas"
   4:WINFILE.EXE,    "Administrador de archivos"
   5:CLIPBRD.EXE,    "Visor del portafolio"
   6:CLIPSRV.EXE,    "Servidor del Portafolio"
   6:CONTROL.EXE,    "Panel de control"
   6:PIFEDIT.EXE,    "Editor PIF"
   5:REGEDIT.EXE,    "Base de datos de registros"
   5:PRINTMAN.EXE,   "Administrador de impresi≤n"
   3:MSD.EXE,        "Diagn≤stico de Microsoft"
   7:msd.ini
   3:WRITE.EXE,      "Procesador de textos Write"
   5:WRITE.HLP,      "Ayuda del procesador de textos Write"
   5:moricons.dll,   "Iconos"

[pwin386]
   6:WINOA386.MOD,   "Archivos del modo extendido del 386"
   7:WIN386.PS2
   2:WIN386.EXE
   5:VTDAPI.386
   6:VFAT.386
   7:VCACHE.386
   5:IFSMGR.386
   7:VSHARE.386
   7:VCOMM.386
   7:SERIAL.386
   7:LPT.386
   7:VPMTD.386
   6:IOS.386
   7:VXDLDR.386
   7:RMM.D32

[DelFiles]
;Statically initialize the list of files that will be DELETED during the
;  3.0 to 3.1 up-grade process. Add or remove items from this list at will,
;  (Wildcards accepted in list)
; The first files in the list are deleted from Windows system dir(local setup).
; Nb : Note that DelFiles section always is processed before RenFiles section.
   tmsr?.fon
   helv?.fon
   swapfile.exe
   kernel.exe
   midi.cpl
   _default.pif
   ; old network setup .cpl's
   wrkgrp.cpl
   wfwsetup.cpl
   netsetup.cpl
   ; ras 1.0 stuff
   rasconf.cpl
   ; the following files are being renamed after beta2
   ipx32.386
   vmsipx.386
   nbipx.386
   ; Beta2  Dragon componentes
   apix.386
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE
; All files in the list AFTER this point will be deleted from Windows dir.
; WARNING: The "..\" is needed, the code depends on it!!!
   ..\setup.inf
   shell.dll
   olecli.dll
   olesvr.dll
   commdlg.dll
   ver.dll
   toolhelp.dll
   *.pcl
   3270.txt
   networks.txt
   printers.txt
   readme.txt
   sysini?.txt
   winini?.txt
   ; ras 1.0 stuff
   rasadmin.exe
   rasphone.exe
   rasphone.hlp
   rasphone.pif
   rasadmin.hlp
   rasadmin.ico
   rasphone.msg
   rasdial.exe
   rashelp.msg
   rasload.bat
   rashelp.exe
   rasconf.hlp
   rasphone.ico
   modems.inf
   comdev.ini
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE

[RenFiles]
; Similar section but for file renaming to create .bak if needed
   ADLIB.DRV,MSADLIB.DRV
   MSCDEX.EXE,MSCDEX.OLD


; The win.apps, win.games, win.scrs, win.bmps, and win.readme sections are
; all formatted as described below.
;
; X:FileName,      Description,     FileSize,   Profile String
;
; Where profile string is used by setup.exe to "lookup" the item in the
; appropiate progman groups section to determine if and how the item is
; to be added to a Program manager group via DDE. The profile string is
; also used to "lookup" and needed dependent files in the [win.dependents]
; section.
;
[win.apps]
   6:CALC.EXE,     "Calculadora"              ,  43232, calc
   4:CARDFILE.EXE, "Fichero"                  ,  94208, cardfile
   2:CLOCK.EXE,    "Reloj"                    ,  16848, clock
   6:NOTEPAD.EXE,  "Bloc de notas"            ,  33808, notepad
   4:PBRUSH.EXE,   "Paintbrush"               , 191438, pbrush
   4:TERMINAL.EXE, "Terminal"                 , 149744, terminal
   6:CALC.HLP,     "Ayuda-Calculadora"        ,  18429
   6:CARDFILE.HLP, "Ayuda-Fichero"            ,  27215
   6:NOTEPAD.HLP,  "Ayuda-Bloc de notas"      ,  22848
   5:PBRUSH.HLP,   "Ayuda-Paintbrush"         ,  42843
   6:RECORDER.EXE, "Grabadora"                ,  50750, recorder
   6:RECORDER.HLP, "Ayuda-Grabadora"          ,  20499
   6:TERMINAL.HLP, "Ayuda-Terminal"           ,  40686
   5:PACKAGER.EXE, "Empaquetador de objetos"  ,  78144, packager
   6:PACKAGER.HLP, "Ayuda-Empaquetador"       ,  22609
   6:CHARMAP.EXE,  "Mapa de caracteres"       ,  22528, charmap
   7:CHARMAP.HLP,  "Ayuda-Mapa de caracteres" ,  12184
   3:MPLAYER.EXE,  "Transmisor de medios"     ,  33904, mplayer, novermsg
   4:MPLAYER.HLP,  "Ayuda-Transmisor medios"  ,  15398
   6:SOUNDREC.EXE, "Grabadora de sonidos"     ,  52089, soundrec
   6:SOUNDREC.HLP, "Ayuda-Grabadora sonidos"  ,  18813
   6:PIFEDIT.HLP,  "Ayuda-Editor PIF"         ,  37149
   4:PRINTMAN.HLP, "Ayuda-Admin. Impresi≤n"   ,  65896
   6:PROGMAN.HLP,  "Ayuda-Admin. Programas"   ,  36890
   4:CLIPBRD.HLP,  "Ayuda-Portapapeles"       ,  31782
   6:REGEDIT.HLP,  "Ayuda-Registro"           ,  23045
   6:REGEDITV.HLP, "Ayuda-Registro avanzado"  ,  17454
   4:WINFILE.HLP,  "Ayuda-Admin. Archivos"    ,  91263
   4:WINTUTOR.EXE, "Tutorial de Windows"      , 184779, wintutor
   5:WINHELP.HLP,  "Ayuda-Utilidad de ayuda"  ,  78417
   3:GLOSSARY.HLP, "Ayuda-Glosario"           ,  59631
   6:EXPAND.EXE,   "Utilidad de expansi≤n"    ,  16462
   7:RASSTART.EXE, "Acceso remoto"            ,  13824, rasmac
   3:MSMAIL.EXE,   "Mail"                     , 642848, msmail
   3:MSMAIL.HLP,   "Ayuda-Mail"               , 223747
   2:SCHDPLUS.EXE, "Schedule+"                , 753760, schdplus
   3:SCHDPLUS.HLP, "Ayuda-Schedule+"          , 271839
   7:FAXMGR.EXE,   "Microsoft At Work Fax"    ,  1069680, msfax
   6:MSFAX.HLP,    "Ayuda-Microsoft At Work Fax",  58320
   diskspace=4685003

[win.dependents]
pbrush   = 7:PBRUSH.DLL
recorder = 7:RECORDER.DLL
wintutor = 4:WINTUTOR.DAT
hearts   = #hearts
msmail   = #msmail
schdplus = #sched
msfax    = #faxsys, 0:system, #msfax

[hearts]
   5:CARDS.DLL,,nodelete

[msmail]
   5:SCHEDMSG.DLL, "Controladores de Mail"
   4:WGPOMGR.DLL
   5:IMPEXP.DLL
   4:FAXVIEW.EXE,  "FAX Viewer", nodelete

[sched]
   6:MSREMIND.EXE, "Controladores de Schedule+"
   4:MSSCHED.DLL
   7:TRNSCHED.DLL

[faxsys]
   6:FAXNSP.DLL,   "Controladores de Fax"
   7:FAX.CPL
   6:FAXSTUB.DLL
   7:EFAXDRV.DRV

[msfax]
   6:AWCLASS1.DLL, "Controladores de Fax"
   6:AWCLASS2.DLL
   7:DLLSCHED.DLL
   7:AWCAS.DLL
   5:EFAXPUMP.DLL
   6:EFAXRUN.DLL
   7:AWFXPROT.DLL
   6:FAXCODEC.DLL
   6:AWFAXIO.DLL
   6:FAXCOVER.DLL,
   4:FAXOPT.DLL,,nodelete
   7:IFKERNEL.DLL
   7:KEYVIEW.EXE,
   6:LINEARIZ.DLL
   6:NETFAX.DLL
   7:SIGVIEW.EXE,
   7:AWT30.DLL
   6:TRNOFF.DLL
   3:MSMAIL.EXE,   "Controladores de Mail para el Fax", nodelete
   5:SCHEDMSG.DLL,,nodelete
   4:WGPOMGR.DLL,,nodelete
   5:IMPEXP.DLL,,nodelete
   4:FAXVIEW.EXE,  "FAX Viewer ", nodelete

[win.games]
   4:SOL.EXE,      "Solitario"       , 180864, sol
   6:WINMINE.EXE,  "Buscaminas"      ,  27856, winmine
   6:SOL.HLP,      "Ayuda-Solitario" ,  15639
   6:WINMINE.HLP,  "Ayuda-Buscaminas",  13487
   4:MSHEARTS.EXE, "Corazones"       , 263728, hearts
   7:MSHEARTS.HLP, "Ayuda-Corazones" ,  13829
   diskspace=515403

[win.scrs]
   7:SCRNSAVE.SCR, "Protector predeterminado" ,   5712
   6:SSMARQUE.SCR, "Protector Marquesina"     ,  17536
   6:SSSTARS.SCR,  "Protector Estrellas"      ,  18176
   6:ssflywin.scr, "Protector Logotipos"      ,  16688
   diskspace=58112

[win.bmps]
   7:GRANITO.BMP,  "Tapiz Granito"            ,    630
   7:ROMBOS.BMP,   "Tapiz Rombos"             ,    630
   7:CASTILLO.BMP, "Tapiz Castillo"           ,    778
   7:EGIPTO.BMP,   "Tapiz Egipto"             ,    630
   7:MIEL.BMP,     "Tapiz Miel"               ,    854
   7:RIVETES.BMP,  "Tapiz Rivetes"            ,    630
   7:LADRILLO.BMP, "Tapiz Ladrillo rojo"      ,    630
   7:CUADROS.BMP,  "Tapiz Cuadros"            ,    630
   7:MALLA.BMP,    "Tapiz Malla"              ,    598
   6:LOGOWIN.BMP,  "Tapiz Logotipo de Windows",  38518
   7:ZIGZAG.BMP,   "Tapiz Zigzag"             ,    630
   7:ding.wav,     "Sonido Ding"              ,  11598
   6:carillon.wav, "Sonido de Carill≤n"       ,  15920
   6:canyon.mid,   "Canci≤n MIDI"             ,  33883
   7:recibir.wav,  "Recibir llamada"          ,  10026
   7:originar.wav, "Originar llamada"         ,   5212
   diskspace=121797

[win.readme]
   3:leame.wri,   "LΘame General"     , 119424, readme
   3:redes.wri,   "LΘame Redes"       , 105600
   3:winini.wri,  "LΘame Win.ini"     ,  37632
   3:sysini.wri,  "LΘame System.ini"  , 114560
   6:mail.wri,    "LΘame Mail"        ,  43136
   3:impresor.wri,"LΘame Impresoras"  ,  63744
   diskspace=484096

; The [*.groups] sections maps a group section to the group name used in
; Program Manager.
;
; Section Name = Progman group name, Min/Max switch. ( 1 = Max, nothing = Min).
;
; This section is used for upgrading from 3.X to 3.1.
[new.groups]
group7=Principal,1
group2=Accesorios
group8=Red
group6=Juegos
group1=Inicio

; This section is for new install.
[progman.groups]
group3=Principal,1
group4=Accesorios
group8=Red
group5=Juegos
group1=Inicio

; Progman DDE control section. This section controls the progman DDE and defines which
; .exe's will be added to which groups. The [progman.groups] sections lists section
; names that each describe the contents of that group.
;
; Description string,  .EXE name, Icon extraction .EXE, Icon extraction index, profile
;
; If the profile field is left NULL, the item will always be added to the group. Otherwise
; the item will only be added if it was installed via the partial install dlg.
;
;
; NOTE: If EXE name is NULL item will be deleted from the group if it exists there.
;

[group3]
"Administrador de archivos", WINFILE.EXE
"Panel de control",          CONTROL.EXE
"Administrador de impresi≤n",PRINTMAN.EXE
"Visor del portafolio",      CLIPBRD.EXE
"MS-DOS",                    DOSPRMPT.PIF, PROGMAN.EXE, 9
"Instalar Windows",          WINSETUP.EXE
"Editor PIF",                PIFEDIT.EXE
"LΘame"
"LΘame",                     LEAME.WRI,,,                              readme
"Portapapeles"
"Visor del Portapapeles"
"Tutorial"

[group4]
"Write",                  WRITE.EXE
"Paintbrush",             PBRUSH.EXE,,,                              pbrush
"Terminal",               TERMINAL.EXE,,,                            terminal
"Bloc de notas",          NOTEPAD.EXE,,,                             notepad
"Grabadora",              RECORDER.EXE,,,                            recorder
"Fichero",                CARDFILE.EXE,,,                            cardfile
"Calculadora",            CALC.EXE,,,                                calc
"Reloj",                  CLOCK.EXE,,,                               clock
"Empaquetador de objetos",PACKAGER.EXE,,,                            packager
"Mapa de caracteres",     CHARMAP.EXE,,,                             charmap
"Transmisor de medios",   MPLAYER.EXE,,,                             mplayer
"Grabadora de sonidos",   SOUNDREC.EXE,,,                            soundrec
"Editor PIF"
; Remove old network icons
"TelΘfono"
"Indicador de sistema"
"Monitor de red"
"Mensajes emergentes"
"Estado de disco virtual"
"Correo rßpido"
"Editor de lista de contrase±as"
"Utilidad de mensajes emergentes"

[group5]
"Solitario",       SOL.EXE,,,                                 sol
"Buscaminas",      WINMINE.EXE,,,                             winmine
"Corazones",       MSHEARTS.EXE,,,                            hearts
; Remove old icons
"Carta blanca"

[group1]
"Dr. Watson"

[group2]
"Empaquetador de objetos",  PACKAGER.EXE,,,                            packager
"Mapa de caracteres",       CHARMAP.EXE,,,                             charmap
"Transmisor de medios",     MPLAYER.EXE,,,                             mplayer
"Grabadora de sonidos",     SOUNDREC.EXE,,,                            soundrec
"Editor PIF"
"Write",                    WRITE.EXE
; Remove old network icons
"TelΘfono"
"Indicador de sistema"
"Monitor de red"
"Mensajes emergentes"
"Estado de disco virtual"
"Correo rßpido"
"Editor de lista de contrase±as"
"Utilidad de mensajes emergentes"

[group6]
"Solitario",       SOL.EXE,,,                                 sol
"Buscaminas",      WINMINE.EXE,,,                             winmine
"Corazones",       MSHEARTS.EXE,,,                            hearts
; Remove old icons
"Carta blanca"

[group7]
"Portapapeles"
"Visor del Portapapeles"
"Visor del portafolio",  CLIPBRD.EXE
"Instalar Windows",      WINSETUP.EXE
"Editor PIF",            PIFEDIT.EXE
"LΘame"
"DOS"
"MS-DOS",                DOSPRMPT.PIF, PROGMAN.EXE, 9
"LΘame",                 LEAME.WRI,,,                              readme
"Tutorial"

[group8]
"Configuraci≤n para la red",   "WINSETUP.EXE /Z",,,
"Mail",             MSMAIL.EXE,,,                              msmail
"Mail",             MSMAIL.EXE,,,                              msfax
"Schedule+",        SCHDPLUS.EXE,,,                            schdplus
"Acceso remoto",    RASSTART.EXE,,,                            rasmac
; Remove old network icons
"Utilidad de mensajes emergentes"

[fonts]
   6:SSERIFE.FON, "MS Sans Serif 8,10,12,14,18,24 (res. VGA)", "100,96,96"
   6:SSERIFF.FON, "MS Sans Serif 8,10,12,14,18,24 (res. 8514/a)", "100,120,120"

   7:COURE.FON, "Courier 10,12,15 (res. VGA)", "100,96,96"
   6:COURF.FON, "Courier 10,12,15 (res. 8514/a)", "100,120,120"

   6:SERIFE.FON, "MS Serif 8,10,12,14,18,24 (res. VGA)", "100,96,96"
   6:SERIFF.FON, "MS Serif 8,10,12,14,18,24 (res. 8514/a)", "100,120,120"

   6:SYMBOLE.FON, "Symbol 8,10,12,14,18,24 (res. VGA)", "100,96,96"
   6:SYMBOLF.FON, "Symbol 8,10,12,14,18,24 (res. 8514/a)", "100,120,120"

   6:SMALLE.FON, "Fuente peque±a (res. VGA)", "100,96,96"
   6:SMALLF.FON, "Fuente peque±a (res. 8514/a)", "100,120,120"

   7:ROMAN.FON, "Roman (Trazador grßfico)",   "CONTINUOUSSCALING"
   7:SCRIPT.FON, "Script (Trazador grßfico)", "CONTINUOUSSCALING"
   7:MODERN.FON, "Modern (Trazador grßfico)", "CONTINUOUSSCALING"

[ttfonts]
;
;Font Header file, Description string,       Font file,     FontFamily/Flags
;
; Flags:  0000 = Normal weighted font.
;         0100 = Bolded font.
;         1000 = Italic font.
; NOTE: Flags not currently used.
;
; NOTE: The first letter of each word in the font desctiption string needs
;       to be capitalized.
;
5:ARIAL.FOT,   "Arial (TrueType)",                           5:arial.ttf,   ""
5:ARIALBD.FOT, "Arial negrita (TrueType)",                   5:arialbd.ttf, "Arial0100"
5:ARIALBI.FOT, "Arial negrita cursiva (TrueType)",           5:arialbi.ttf, "Arial1100"
5:ARIALI.FOT,  "Arial cursiva (TrueType)",                   5:ariali.ttf,  "Arial1000"
5:COUR.FOT,    "Courier New (TrueType)",                     5:cour.ttf,    ""
5:COURBD.FOT,  "Courier New negrita (TrueType)",             5:courbd.ttf,  "Courier0100"
5:COURBI.FOT,  "Courier New negrita cursiva (TrueType)",     5:courbi.ttf,  "Courier1100"
5:COURI.FOT,   "Courier New cursiva (TrueType)",             5:couri.ttf,   "Courier1000"
5:TIMES.FOT,   "Times New Roman (TrueType)",                 5:times.ttf,   ""
5:TIMESBD.FOT, "Times New Roman negrita (TrueType)",         5:timesbd.ttf, "Times New Roman0100"
5:TIMESBI.FOT, "Times New Roman negrita cursiva (TrueType)", 5:timesbi.ttf, "Times New Roman1100"
5:TIMESI.FOT,  "Times New Roman cursiva (TrueType)",         5:timesi.ttf,  "Times New Roman1000"
5:SYMBOL.FOT,  "Symbol (TrueType)",                          5:symbol.ttf,  ""
5:WINGDING.FOT,"WingDings (TrueType)",                       5:wingding.ttf,""

; If any of these drivers are found in the config.sys file, Setup removes them.
[compatibility]
icache.sys
ibmcache.sys
cache.sys
cache.exe
mcache.sys
fast512.sys

; Known TSRs and drivers which may result in a hang or crash
; during execution of Setup or Windows.
;
; filename = description string
[incompTSR1]
ep.exe      = "Norton Desktop/Windows Protector de eliminación TSR"
qmaps.sys   = "Administrador de memoria QMAPS"
qcache.exe  = "Caché 386 Max Disk"
cache.exe   = "Caché de disco"
flash.exe   = "Caché de disco Flash"
hyper386.exe= "Caché de disco Hyper"
hyperdkx.exe= "Caché de disco Hyper"
hyper286.exe= "Caché de disco Hyper"
hyperdke.exe= "Caché de disco Hyper"
hyperdkc.exe= "Caché de disco Hyper"
ncache.exe  = "Caché de disco Norton"
ncache2.exe  = "Caché de Norton Utilities"
speeddrv.exe  = "Unidad de velocidad Norton"
pc-kwik.exe = "Caché de disco PC-Kwik"
pc-cache.com= "Caché de disco PC Tools"
superpck.exe= "Caché de disco Super PC-Kwik"
vdisk.sys   = "Utilidad de disco IBM RAM"
allemm4.sys="All Charge 386"
anarkey.com="Anarkey"
vsafe.sys = "Antivirus de Central Point "
vsafe.com = "Antivirus de Central Point TSR"
vdefend.sys="PC Tools VDefend"
vdefend.com="PC Tools VDefend"
kbflow.exe="KBFlow TSR de Artisoft"
s-ice.exe="SoftIce"
desktop.exe="PC Tools Desktop TSR"
sk2.exe="Sidekick versión 2.0"
sk.com="Sidekick versión 1.0"
skplus.exe="Sidekick Plus"
print.exe="Utilidad PRINT de MS-DOS"
pyro.exe="Protector de pantalla Pyro!"
xgaaidos.sys="Controlador de emulador de 8514"
asplogin.exe="ASP Integrity Toolkit"
lsallow.exe="Utilidades de red Lansight TSR"
lansel.exe="Utilidades de red Lansight TSR"
vaccine.exe="Programa de vacunación antivirus"
newspace.exe="Compresor de disco Newspace"
newres.exe="Compresor de disco Newspace"
tscsi.sys="Controlador Trantor T100  SCSI"
pcpanel.exe="Panel de control Lasertools Printer"
hpemm386.sys = "Administrador de memoria expandida HP"
hpemm486.sys = "Administrador de memoria expandida HP"
ramtype.sys  = "Utilidad Ramtype"
iemm.sys     = "Administrador de memoria"
ilim386.sys  = "Emulador de memoria expandida Intel"
cmdedit.com  = "Editor de línea de comandos"
hpmm.sys     = "Administrador de memoria HP"
ced.exe      = "Editor de línea de comandos PCED"
ced.com      = "Editor de línea de comandos CED"
umbpro.sys   = "Administrador de memoria UMB Pro"
rm386.sys    = "Administrador de memoria NetRoom"
eimpcs.sys   = "Soporte de IBM PC"
ecyddx.sys   = "Soporte de IBM PC"

; Known TSRs and device drivers which can(!) potentially cause problems
; if running during Setup or Windows
;
; filename = description string
[incompTSR2]
ndosedit.com  = "Editor de línea de comandos"
doscue.com="Editor de línea de comandos DOSCUE"
datamon.exe="PC Tools Datamon"
subst.exe="Utilidad SUBST de MS-DOS"
join.exe="Utilidad JOIN de MS-DOS"
viralert.sys="Data Physician Plus TSR"
graphics.com="Utilidad GRAPHICS de MS-DOS"
le.com="Le Menu Menuing Package"
assign.com="Utilidad ASSIGN de MS-DOS"
append.com="Utilidad APPEND de MS-DOS"
diskmon.exe="Monitor de disco Norton TSR"
dubldisk.sys="Compresor Double Disk Data"
pa.exe = "Printer Assist"
speedfxr.com = "Speedfxr"
pcsxmaem.sys = "Utilidad pcsxmaem"
xmaem.sys    = "Utilidad xmaem"
cubitr.exe   = "Cubit"

[block_devices]
tscsi.sys
tcscsi.sys
atdosxl.sys
dmdrvr.bin
drdrive.sys

[Installable.Drivers]
; key         = filename,       type(s),     description, VxD(s), Default Params
msadlib       = 5:msadlib.drv,  "MIDI",      "Ad Lib", 5:vadlibd.386,
lapc1         = 7:mpu401.drv,   "MIDI",      "Roland LAPC1",,
midimapper    = 5:midimap.drv,  "MidiMapper","Mapeador MIDI",,
mpu401        = 7:mpu401.drv,   "MIDI",      "Roland MPU-401",,
sequencer     = 6:mciseq.drv,   "Sequencer", "Secuenciador [MCI] MIDI",,
soundblaster  = 5:sndblst.drv,  "Wave,MIDI", "Creative Labs Sound Blaster 1.0", 5:vsbd.386,, msadlib
soundblaster2 = 5:sndblst2.drv, "Wave,MIDI", "Creative Labs Sound Blaster 1.5", 5:vsbd.386,, msadlib
timer         = 5:timer.drv,    "Timer",     "Timer", 5:vtdapi.386,
thunder       = 5:sndblst2.drv, "Wave",      "Media Vision Thunder Board", 5:vsbd.386,, msadlib
wave          = 6:mciwave.drv,  "WaveAudio", "Sonido [MCI]",, "4"
cdaudio       = 7:mcicda.drv,   "CDAudio",   "Audio CD [MCI]",,

; This section translates Windows 3.0 OEMSETUP.INF entries to their 3.1
; equivalents. The disk names should be the first entries in the list.

[translate]
WinDiskName=26,"Disquete de Microsoft Windows 3.0"
WinDiskName=14,"Disquete n·mero"
*vddvga=2:vddvga30.386
vgalogo.lgo=2:vgalogo.lgo
vgalogo.rle=2:vgalogo.rle
rgdi.lgo=2:vgalogo.lgo
rgdi.rle=2:vgalogo.rle
vga.gr3=2:vga30.3gr
v7vga.gr3=2:v7vga.3gr
cga40woa.fon=2:cga40woa.fon
cga40850.fon=2:cga40850.fon
cga80woa.fon=2:cga80woa.fon
cga80850.fon=2:cga80850.fon
ega40woa.fon=2:ega40woa.fon
ega40850.fon=2:ega40850.fon
ega80woa.fon=2:ega80woa.fon
ega80850.fon=2:ega80850.fon
vgasys.fon=2:vgasys.fon
vgafix.fon=2:vgafix.fon
vgaoem.fon=2:vgaoem.fon
8514sys.fon=2:8514sys.fon
8514fix.fon=2:8514fix.fon
8514oem.fon=2:8514oem.fon
helve.fon=6:sserife.fon
helvf.fon=6:sseriff.fon
coure.fon=7:coure.fon
courf.fon=6:courf.fon
tmsre.fon=6:serife.fon
tmsrf.fon=6:seriff.fon
symbole.fon=6:symbole.fon
symbolf.fon=6:symbolf.fon
roman.fon=7:roman.fon
script.fon=7:script.fon
modern.fon=7:modern.fon
kbdbe.dll=2:kbdbe.dll
kbduk.dll=2:kbduk.dll
kbdda.dll=2:kbdda.dll
kbdne.dll=2:kbdne.dll
kbdfi.dll=2:kbdfi.dll
kbdfr.dll=2:kbdfr.dll
kbdca.dll=2:kbdca.dll
kbdgr.dll=2:kbdgr.dll
kbdic.dll=2:kbdic.dll
kbdit.dll=2:kbdit.dll
kbdla.dll=2:kbdla.dll
kbdno.dll=2:kbdno.dll
kbdpo.dll=2:kbdpo.dll
kbdsp.dll=2:kbdsp.dll
kbdsw.dll=2:kbdsw.dll
kbdsf.dll=2:kbdsf.dll
kbdsg.dll=2:kbdsg.dll
kbdus.dll=2:kbdus.dll
kbddv.dll=2:kbddv.dll
kbdusx.dll=2:kbdusx.dll
xlat863.bin=2:xlat863.bin
xlat861.bin=2:xlat861.bin
xlat865.bin=2:xlat865.bin
xlat850.bin=2:xlat850.bin
xlat860.bin=2:xlat860.bin
vga863.fon=2:vga863.fon
vga861.fon=2:vga861.fon
vga865.fon=2:vga865.fon
vga850.fon=2:vga850.fon
vga860.fon=2:vga860.fon
win.cnf=1:win.cnf

; Used to update files that already exist on the disk
;
[Update.Files]
0:system,5:sndblst.drv
0:system,5:sndblst2.drv
0:system,7:mpu401.drv
0:system,5:msadlib.drv
0:system,5:vtdapi.386
0:system,5:vsbd.386
0:system,5:vadlibd.386
0:system,7:mcicda.drv
0:system,6:cpqgr3.exe
0:system,6:cpqvga.gr3
0:system,6:pscript.drv

; Used to update dependents of files in the [Update.Files] section.
;
[Update.Dependents]
msadlib.drv = 5:vadlibd.386
sndblst.drv = 5:vsbd.386
sndblst2.drv = 5:vsbd.386

; This section is processed by both the DOS and WINDOWS portions of setup
; for temporarily renaming profile strings during setup. THE RENAME
; OPERATION WILL ONLY TAKE PLACE IF THE ORIGINAL PROFILE STRING EXISTS AND HAS
; A RIGHT HAND SIDE STRING.
;
; .ini file,  section name, temporary profile name, Original profile name.
;
[ini.upd.patches]
  system.ini, Boot,    "olddrivers"    ,"drivers"
  win.ini   , Desktop, "oldwallpaper"  ,"wallpaper"
  system.ini, Boot,    "oldtaskman"    ,"taskman.exe"
  system.ini, Boot,    "wfwshell"      ,"shell"

[setupdisplay]
mach32.drv=2:vga.drv
cirrus.drv=2:svga256.drv
wd.drv=2:svga256.drv
framebuf.drv=2:svga256.drv
tseng.drv=2:svga256.drv
linear8.drv=2:vga.drv
cpqavga.drv=2:vga.drv
ht256sf.drv=2:vga.drv
orchidf.drv=2:vga.drv
s3.drv=2:vga.drv
s3?.drv=2:vga.drv
s3??.drv=2:vga.drv
s3???.drv=2:vga.drv
s3????.drv=2:vga.drv
s3?????.drv=2:vga.drv
s3??????.drv=2:vga.drv
viper_??.drv=2:vga.drv
mach-??.drv=2:vga.drv
m32-??.drv=2:vga.drv

[setupdisplay.fon]
fonts.fon=2:vgasys.fon
fixedfon.fon=2:vgafix.fon
oemfonts.fon=2:vgaoem.fon

; Used by the windows half to shrink the memory needed to hold this pig.
;
[blowaway]
   this line needed

[ini.upd.31]
;
; WARNING: This section only works on win.ini or system.ini !!
;
; .ini file,  section,  old line to be replaced,  new line,  rename operater.
;
; If the "old line to be replaced" field is empty, setup will assume that
; the new line is to be added. The rename operater tells setup to retain the RHS
; of the profile. This is used as a renaming mechanism during upgrades.
; Nb : Simple string substitution is implemented :
;     ?P means any valid MS-DOS path
;
  system.ini, Boot,                               ,   "taskman.exe="
  system.ini, mci,     "waveaudio="               ,   "WaveAudio=mciwave.drv"
  system.ini, mci,     "sequencer="               ,   "Sequencer=mciseq.drv"
  system.ini, mci,     "cdaudio="                 ,   "CDAudio=mcicda.drv"
  system.ini, drivers,                            ,   "timer=timer.drv"
  system.ini, drivers,         "midimapper="      ,   "midimapper=midimap.drv"
  system.ini, drivers, "midi=adlib.drv"           ,   "midi=msadlib.drv"          ,rename
  system.ini, drivers, "midi1=adlib.drv"          ,   "midi1=msadlib.drv"         ,rename
  system.ini, drivers, "midi2=adlib.drv"          ,   "midi2=msadlib.drv"         ,rename
  system.ini, drivers, "midi3=adlib.drv"          ,   "midi3=msadlib.drv"         ,rename
  system.ini, drivers, "midi4=adlib.drv"          ,   "midi4=msadlib.drv"         ,rename
  system.ini, 386Enh,       "keyboard=?Pbpvkd.386",
  system.ini, 386Enh,          "keyboard="        ,   "keyboard=*vkd"             ,noclobber
  system.ini, 386Enh,       "device=vpicda.386"   ,   "device=*vpicd"
  system.ini, 386Enh,       "device=vpicd.386"    ,   "device=*vpicd"
  system.ini, 386Enh,                             ,   "device=ifsmgr.386"
  system.ini, 386Enh,                             ,   "device=vcache.386"
  system.ini, vcache,       "minfilecache="       ,   "minfilecache=512", noclobber
  system.ini, 386Enh,       "device=?Pvshare.386" ,   "device=vshare.386"
  system.ini, 386Enh,          "device=*vhd"      ,   "device=*BLOCKDEV", rename
  system.ini, 386Enh,          "device=apix.386"  ,
  system.ini, 386Enh,          "device=*vpd"      ,
  system.ini, 386Enh,          "device=vpd.386"   ,
  system.ini, 386Enh,          "device=vdmad.386" ,   "device=*vdmad"
  system.ini, 386Enh,          "device=vdmadx.386",   "device=*vdmad"
  system.ini, 386Enh,          "device=vcd.386"   ,   "device=*vcd", rename
  system.ini, 386Enh,       "device=vndis2d.386"  ,
  system.ini, 386Enh,                             ,   "device=*pagefile"
  system.ini, 386Enh,       "device=?Pvtdapi.386" ,   "device=vtdapi.386"
  system.ini, 386Enh,                             ,   "device=vcomm.386"
  system.ini, 386Enh,       "device=ns8250.386"   ,   "device=serial.386"
  system.ini, 386Enh,                             ,   "device=serial.386"
  system.ini, 386Enh,       "device=comlpt.386"   ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=vpmtd.386"
  system.ini, NonWindowsApp,"localtsrs="          ,   "localtsrs=dosedit,ced"  ,noclobber
  system.ini, 386Enh,       "COM3Irq="            ,   "COM3Irq=4", noclobber
  system.ini, 386Enh,       "COM3Base="           ,   "COM3Base=03E8", noclobber
  system.ini, 386Enh,       "COM4Irq="            ,   "COM4Irq=3", noclobber
  system.ini, 386Enh,       "COM4Base="           ,   "COM4Base=02E8", noclobber
  win.ini   , Sounds,  "SystemDefault="           ,   "SystemDefault=ding.wav, Sonido predeterminado"      ,noclobber
  win.ini   , Sounds,  "SystemExclamation="       ,   "SystemExclamation=ding.wav, Exclamaci≤n"  ,noclobber
  win.ini   , Sounds,  "SystemStart="             ,   "SystemStart=carillon.wav, Iniciar Windows"       ,noclobber
  win.ini   , Sounds,  "SystemExit="              ,   "SystemExit=carillon.wav, Salir de Windows"       ,noclobber
  win.ini   , Sounds,  "SystemHand="              ,   "SystemHand=ding.wav, Parada crφtica"       ,noclobber
  win.ini   , Sounds,  "SystemQuestion="          ,   "SystemQuestion=ding.wav, Pregunta"        ,noclobber
  win.ini   , Sounds,  "SystemAsterisk="          ,   "SystemAsterisk=ding.wav, Asterisco"        ,noclobber
  win.ini   , "mci extensions",                   ,   "wav=waveaudio"
  win.ini   , "mci extensions",                   ,   "mid=sequencer"
  win.ini   , "mci extensions",                   ,   "rmi=sequencer"
  win.ini   , FontSubstitutes,                    ,   "Helv=MS Sans Serif"
  win.ini   , FontSubstitutes,                    ,   "Tms Rmn=MS Serif"
  win.ini   , FontSubstitutes, "Courier=Courier New" ,
  win.ini   , FontSubstitutes,                    ,   "Times=Times New Roman"
  win.ini   , FontSubstitutes,                    ,   "Helvetica=Arial"
  ;
  ; Remove these Win 3.0 font entries from win.ini because they have either
  ; been replaced or removed for Win 3.1
  ;
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. CGA)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. EGA)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. VGA)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. 8514/a)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. CGA)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. EGA)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. VGA)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. 8514/a)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "TrueType" rather than "Scalable"
  ;
  win.ini, Fonts, "Arial (proporcional)="
  win.ini, Fonts, "Arial negrita (proporcional)="
  win.ini, Fonts, "Arial negrita cursiva (proporcional)="
  win.ini, Fonts, "Arial cursiva (proporcional)="
  win.ini, Fonts, "Courier (proporcional)="
  win.ini, Fonts, "Courier negrita (proporcional)="
  win.ini, Fonts, "Courier cursiva (proporcional)="
  win.ini, Fonts, "Courier negrita cursiva (proporcional)="
  win.ini, Fonts, "Courier (TrueType)"
  win.ini, Fonts, "Courier negrita (TrueType)"
  win.ini, Fonts, "Courier negrita cursiva (TrueType)"
  win.ini, Fonts, "Courier cursiva (TrueType)"
  win.ini, Fonts, "Times New Roman (proporcional)="
  win.ini, Fonts, "Times New Roman negrita (proporcional)="
  win.ini, Fonts, "Times New Roman negrita cursiva (proporcional)="
  win.ini, Fonts, "Times New Roman cursiva (proporcional)="
  win.ini, Fonts, "Symbol PS (proporcional)="
  win.ini, Fonts, "Symbol (proporcional)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "Plotter" rather than "All res" Also, 8 point was
  ; added to the EGA res courier so we remove the old "Courier 10,12,15" font.
  ;
  win.ini, Fonts, "Roman (todas las res.)="
  win.ini, Fonts, "Script (todas las res.)="
  win.ini, Fonts, "Modern (todas las res.)="
  win.ini, Fonts, "Courier 10,12,15 (res. EGA)="
  ;
  ; The following lines will cause the MS-DOS half of setup to effectivly
  ; rename the [Fonts] section in win.ini. Setup does this by adding the
  ; [wt4gpi8s56bz] string to the [Fonts] section and then deleting the
  ; [Fonts] section string. Later, in the windows half of setup, it will
  ; rename [wt4gpi8s56bz] back to [Fonts]. Do not change these names!
  ;
  win.ini, Fonts,              , "[wt4gpi8s56bz]"
  win.ini, Fonts,   "[Fonts]"  ,

  ; The following line makes USER skip persistent net connections
  ; USER immediately deletes the entry so it is a onetime thing.
  win.ini, windows,, "SetupWin=1"

  ; The following lines fix problems with APPS
  win.ini, Compatibility,"NOTSHELL=", "NOTSHELL=0x0001"
  win.ini, Compatibility,"WPWINFIL=", "WPWINFIL=0x0006"
  win.ini, Compatibility,"CCMAIL=", "CCMAIL=0x0008"
  win.ini, Compatibility,"AMIPRO=", "AMIPRO=0x0010"
  win.ini, Compatibility,"REM=", "REM=0x8022"
  win.ini, Compatibility,"PIXIE=", "PIXIE=0x0040"
  win.ini, Compatibility,"CP=", "CP=0x0040"
  win.ini, Compatibility,"JW=", "JW=0x42080"
  win.ini, Compatibility,"TME=", "TME=0x0100"
  win.ini, Compatibility,"VB=", "VB=0x0200"
  win.ini, Compatibility,"WIN2WRS=", "WIN2WRS=0x1210"
  win.ini, Compatibility,"PACKRAT=", "PACKRAT=0x0800"
  win.ini, Compatibility,"VISION=", "VISION=0x0040"
  win.ini, Compatibility,"MCOURIER=", "MCOURIER=0x0800"
  win.ini, Compatibility,"_BNOTES=", "_BNOTES=0x24000"
  win.ini, Compatibility,"MILESV3=", "MILESV3=0x1000"
  win.ini, Compatibility,"PM4=", "PM4=0x2000"
  win.ini, Compatibility,"DESIGNER=", "DESIGNER=0x2000"
  win.ini, Compatibility,"PLANNER=", "PLANNER=0x2000"
  win.ini, Compatibility,"DRAW=", "DRAW=0x2000"
  win.ini, Compatibility,"WINSIM=", "WINSIM=0x2000"
  win.ini, Compatibility,"CHARISMA=", "CHARISMA=0x2000"
  win.ini, Compatibility,"PR2=", "PR2=0x2000"
  win.ini, Compatibility,"PLUS=", "PLUS=0x1000"
  win.ini, Compatibility,"ED=", "ED=0x00010000"
  win.ini, Compatibility,"PP=",
  win.ini, Compatibility,"APORIA=", "APORIA=0x0100"
  win.ini, Compatibility,"EXCEL=", "EXCEL=0x1000"
  win.ini, Compatibility,"GUIDE=", "GUIDE=0x1000"
  win.ini, Compatibility,"NETSET2=", "NETSET2=0x0100"
  win.ini, Compatibility,"W4GL=", "W4GL=0x4000"
  win.ini, Compatibility,"W4GLR=","W4GLR=0x4000"
  win.ini, Compatibility,"TURBOTAX=","TURBOTAX=0x00080000"
  win.ini   , Sounds,  "RingIn="                  ,   "RingIn=originar.wav,Originar llamada Chat"     ,noclobber
  win.ini   , Sounds,  "RingOut="                 ,   "RingOut=recibir.wav,Recibir llamada Chat"   ,noclobber
  win.ini   , Network, "DefaultDialogs="

 ; defaults to put up net warning messages
  win.ini, windows, "NetMessage=", "NetMessage=Yes"
  win.ini, windows, "NetWarn=",    "NetWarn=1"

 ; remove beta2 lines
  win.ini, PrinterPorts,          "Microsoft Mail Local Fax="
  win.ini, devices,               "Microsoft Mail Local Fax="

[system]
; The various SYSTEM.DRV, SOUND.DRV, COMM.DRV
;
; These   are the   drivers   which may vary from system to system,
; but are selected only   by the [machine] menu -- they do not have
; special menus   for their selection.
system   =    2:system.drv
sound    =    2:mmsound.drv
comm     =    2:comm.drv
hpsystem =    2:hpsystem.drv

[machine]
; This section defines default machine selections.  The   system
; description from each   entry will appear in the initial machine
; selection menu of Setup.
;
; An * means that setup will use the device specified here and override
; the detected device, this applies to keyboards, mice, and displays.
;
; Each entry contains a   descriptive line for the system-selection menu,
; followed by the filenames of the drivers in fixed order.
;
;      Field      1         2           3        4         5          6         7          8         9             10     11
; prof_str      = Desc Str, System drv, kbd drv, kbd type, mouse drv, disp drv, sound drv, comm drv, himem switch, ebios, cookies
;
ibm_compatible  = "Sistemas MS-DOS",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,
ast_386_486     = "AST Premium 386/25 y 386/33 (CUPID)",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,ast_cookz
at_and_t        = "AT&T PC",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,
everex_386_25   = "Everex Step 386/25 (o Compatible)",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,everex_cookz
hewlett_packard = "Todas las mßquinas Hewlett-Packard",hpsystem,kbdhp,t4s0enha,nomouse,vga,sound,comm,,hpebios,
ibm_ps2_70p     = "IBM PS/2 modelo P70",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
ibm_ps2_l40sx   = "IBM PS/2 modelo L40sx",system,kbd,!t4s0enha,nomouse,vga,sound,comm,,ebios,ibml40_cookz
ncr_386sx       = "Todas las mßquinas NCR basadas en 80386 y 80486",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,ncr386sx_cookz
nec_pm_sx+      = "NEC PowerMate SX Plus",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,nec_pm_cookz
nec_prospeed    = "NEC ProSpeed 386",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
toshiba_1600    = "Toshiba 1600",system,kbd,t4s0enha,nomouse,vga,sound,comm,"TOSHIBA",ebios,
toshiba_5200    = "Toshiba 5200",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,t5200_cookz
zenith_386      = "Todas las mßquinas Zenith Data Systems 386/486",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,zen386_cookz
att_nsx_20      = "AT&T NSX 20: Safari notebook",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios
apm             = "Sistema MS-DOS con APM",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,apm_cookz
apm_sl          = "Sistema Intel basado en 386SL con APM",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,apm_sl_cookz

;
; Cookies as specified in machine section
;
; ini file, section, cookie, needed file
;
; specialdriver,,,file will add an installable driver to [boot]drivers=
;

[apm_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp

[apm_sl_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp
system.ini,power.drv,"OptionsDLL=sl.dll",2:sl.dll
,,,2:sl.hlp

[ast_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[everex_cookz]
system.ini,386enh,"8042ReadCmd=A2,1,F",
system.ini,386enh,"8042ReadCmd=A3,1,F",
system.ini,386enh,"8042WriteCmd=B3,8,F",

[ibml40_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"DMAbuffersize=64"


[ncr386sx_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"emmexclude=C600-C7FF",

[nec_pm_cookz]
system.ini,386enh,"VirtualHDirq=NO",

[t5200_cookz]
system.ini,386enh,"emmexclude=C000-C7FF",

[zen386_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[special_adapter]
eitherlink  = DMAbuffersize,32          ; Needed if EitherLink MC is detected.

[ebios]
ebios       = x:*ebios               ; Required for most 386 machines.
hpebios     = 2:hpebios.386,x:*ebios ; Required for HP 386 machines.

;
; Language DLL must be installed for non US installation.
;
; profile = language DLL, DLL description, language ID (ilanguage)
;
[language]
deu = 2:langger.dll, "Alemßn"                   ,1031
dan = 2:langsca.dll, "DanΘs"                    ,1030
esp = 2:langspa.dll, "Espa±ol"                  ,1034
esn = 2:langeng.dll, "Espa±ol (Moderno)"        ,3082
fin = 2:langsca.dll, "FinlandΘs"                ,1035
fra = 2:langfrn.dll, "FrancΘs"                  ,1036
frc = 2:langeng.dll, "FrancΘs Canadiense"       ,3084
nld = 2:langdut.dll, "HolandΘs"                 ,1043
enu =                     , "InglΘs (americano)",1033
eng = 2:langeng.dll, "InglΘs (internacional)"   ,2057
isl = 2:langsca.dll, "IslandΘs"                 ,1039
ita = 2:langeng.dll, "Italiano"                 ,1040
nor = 2:langsca.dll, "Noruego"                  ,1044
ptg = 2:langeng.dll, "PortuguΘs"                ,2070
sve = 2:langsca.dll, "Sueco"                    ,1053

; files included on disk but not referenced in anywhere in setup.inf
[keepers]
    1:instalar.exe  ; dossetup program
    1:setup.inf     ; setup information file
    1:xmsmmgr.exe   ; xms manager
    1:setup.shh     ; automatic setup template file
    6:prtupd.inf    ; Printer driver update file
    9:admincfg.exe  ; Network Admin Utility
    9:pss.inf  ; PSS Support Protocol File

; List of 3rd party drivers that replace *wdctrl
; Setup will not add *wdctrl if one of these is present
[*wdctrl]
    cpqwdctl.386    ; compaq wd controller
    ultraisa.386    ; ultra store wd controller
    fdscsi.386      ; future domain scsi
    hc_win.386      ; quantum hardcard
    cam_win.386     ; quantum passport scsi
    scsi_win.386    ; quantum passport scsi

; List of 3rd party drivers that replace *int13
; Setup will not add *int13 if one of these is present
[*int13]
    cpqint13.386    ; used with compaq cpqwdctl.386
    qtmint13.386    ; used with quantum hc_win.386, cam_win.386, and scsi_win.386
    int13.386       ; used with future domain

; List of 3rd party drivers that replace *vpd
; Setup will not add *vpd if one of these is present
[*vpd]
    wpsljvpd.386